Embroidex Cap/Hat Hoop for Brother Embroidery Machine SE270D HE-120 900D HE-240 Description: How To Embroider A Cap With This Hoop Cut a piece of adhesive stabilizer slightly larger than the cap hoop frame and pull the backing off. Stick the stabilizer to the bottom frame of the cap hoop. Try wrapping the stabilizer around the edges of the cap hoop, if it doesn’t stick tightly enough. Using a water-soluble pen, mark the center of the design on the cap. Loosen the back strap on the cap. Unscrew the thumbscrew on the hoop clamp to and slide the cap bill under the clamp. Using the markings you made on the cap and the template grid, arrange the cap so that the center of the design aligns with the center of the hoop. Before you tighten the clamp, make sure the sweatband and backing are pulled away from the embroidery area so that you don’t stitch it to the cap. You may have to tape or pin the sweatband to keep it out of the way. The buckram (stiff backing) under the sweatband also has to be pulled back. If necessary to pull it back neatly, cut the buckram an inch or two where it is stitched to the cap bill on each side. Tighten the clamp with the thumbscrew. Starting in the middle and working out to the edges, press the cap down firmly against the adhesive stabilizer. The cap must be as flat and smooth as possible. Clamp the cap hoop to the regular 4×4 inch hoop on the side opposite where it attaches to the embroidery unit. Turn the SE400 on and set it up for embroidery as usual. Turn the embroidery unit on and attach the regular 4×4 inch hoop with the cap hoop attached. You may have to remove the foot and/or shank to do this. Use the curser keys to center the needle and begin to embroider your design onto the cap. Remember, the design must be rotated clockwise a quarter turn because the cap is hooped sideways and you want the design vertical. Features:
★ If you want to personalize caps and hats with designs such as logos, initials, names, you’ll need a cap hoop. The cap hoop attaches to your regular 4×4 inch hoop and holds the bill of the cap firmly in a clamp outside of the embroidery frame. The cap itself is attached to the hoop with adhesive stabilizer.
Returns
Domestic USA Orders Only.
We accept returns on items for a period of 30 days from the date of purchase. All product and packaging must be in new and unused resalable condition. Shipping is non-refundable.
To initiate a return, please contact us for an RMA number. RMA's can take up to 2 business days to generate. Returns without an RMA number will not be accepted.
Payment
We accept the following forms of payment:
PayPal
All major credit cards.
Shipping
We ship within 1 business day of date of purchase. Package will typically arrive within 3-5 business days. We offer 2nd Day Shipping and Next Day shipping via expedited carriers for an additional cost. The shipping Charges will be displayed at the checkout. Please note: We do not currently ship to Alaska, Hawaii, APO, FPO, and US Territories including Puerto Rico, Guam, US Virgin Islands, American Samoa, Northern Mariana Islands, and Micronesia.
Returns Accepted for this item if it's within 30 Days